Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   Odd firing behaviour TM M4 (https://airsoftcanada.com/showthread.php?t=85636)

Copcarman July 2nd, 2009 22:15

Odd firing behaviour TM M4
 
Hello!

I was wondering if anyone could help me. My friend lent me his stock TM M4, and there's a bit of a problem.

Upon test firing of the gun, Corvinus and I found that after every few shots, a BB or a pair of BBs could come out at a 45 degree angle towards the ground, at a high speed. It even happened during the chrony at the last game we went to. I say it might be a double feed since the gun is not maintained well, and since he shot really crappy BBs out of it.

I would like to know if anyone knows what it might be, and if we can fix it.

Thanks!

James/Copcarman

lemegacool July 2nd, 2009 22:17

probably the hop up rubber is worn out or torn... OR some sort of loading mech malfunction...


but check the rubber first...

Amos July 2nd, 2009 22:19

Torn hop-up rubber!

Copcarman July 2nd, 2009 22:23

Thanks for the responses guys, apparantly it's not the first time he's had a torn rubber on the hop-up, we'll check it out again tommorow and i'll give feedback when we're done.

lemegacool July 2nd, 2009 22:24

Quote:

Originally Posted by Copcarman (Post 1017754)
Thanks for the responses guys, apparantly it's not the first time he's had a torn rubber on the hop-up, we'll check it out again tommorow and i'll give feedback when we're done.

stop firing crappy bb's with it!:p;)

Copcarman July 2nd, 2009 22:27

That's what we're saying right now :P

We're going to tell him as soon as we give it back to use high polish BBs. Since I got it, we've been using BB Bastards.

Copcarman July 3rd, 2009 16:04

Okay, so we took apart the rifle, and the hop-up rubber is fine, not torn in the slightest.


PS: it's a two piece hop-up

lemegacool July 3rd, 2009 18:07

next step, look for proper loading mech operation, look if the loading nozzle is operating as it should. you could also crack the mechbox up to inspect it for : broken tappet plate/ return spring, or maybe the nozzle is just not on the tappet plate...


All times are GMT -4. The time now is 21:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.