How to remove iron sight on ak47?
 

Hey guys,

I have the Echo1 ak47 RIS, i know it's not a WOW gun but it's ok for starters ;) I'm looking foward upgrading it.

I bought a tightbore precision inner barrel , hop-up chamber , hop-up bucking and sleeve and air seal nozzle for ak47.

I'm wondering , how do you remove the ironsight so i can remove the inner barrel and get access to the hop-up chamber and hop-up bucking? A guide for opening the gearbox (to change the nozzle) will be very helpful. I googled all around and i searched on ASC , coulnt find a thing =/ .... Thank you.

You don't need to touch the sights. Take out all the screws on the bottom. The 2 in the mag well and the two outside the magwell. Make sure you have the nub-handle thing taken off the hopup prior. After that the front assembly slides off the reciever.

check mechbox.com

However if you ever want to remove the sights for another reason the screw is sometimes hidden under the fake cleaning rod.

http://www.airsoftgunrepair.com/airsoftgunrepair3.html

took me 2 sec.

yea, pretty much start here.
http://www.airsoftgunrepair.com/albu...57/1463359.htm

looks confusing at first, i haven't received the parts yet but i guess i will try to manage on how to remove things, if i'm stuck , ill just refer to the pictures i guess. Thanks guys.

Nah its simple you'll get the hang of it

air nozzle is the tip of the gearbox right? The part that allows air to come out. Therefore, i need to open the gearbox and switch air nozzle...

hop-up chamber should be the plastic opening we see after removing the mag.

What about hop-up bucking? Is it a part that is attached to the inner barrel ? Thank you.