Tactical Force TF 11 Jamming Problem...help...
 

Hey guys,
i just bought a Tactical Force TF 11, so i went and loaded up a fresh c-02 right outta the box and was about to take the first couple of shots (dry fire). So i put in the mag cocked it back and let off 2 shots in semi....everything seemed fine so i switched to auto and tried to take a little burst, about 3 shots went off then a plastic (pointless visual) piece on the top of the gun just in front of the rear sights flew off (easily fixed snapped back in)....buuuut during this little "harmless" problem my gun is now jammed in a way where the bolt and slide attached will not go back into proper place :banghead: ...nor will it fire at all......the bolt/slide wont close properly by about just less than a centimeter. i can post pics if needed but what do you guys think......the place i bought it from does not do refunds but im gunna go in tommorow to see what i can do (possible exchange)....if this can be fixed easily then i really wont care to bring it back but i think it might be safer for now...........i still want input tho....who knows...................................clarkee86. ........

Pictures please. If It is what I think it is i might be able to help.
________
CHEAP CYLINDER ADAPTOR NOZZLE S THUNDER ACC X006

take that piece back out if u can and then retry

!!!!!Update with Pics PLZ Help...!!!
 

ya i deff tried to see if it would shoot before puting the peice back in ...but like i said honestly the peice is just a lil plastic plate to make a corner smoother on the top its purely just to make the gun look prettier. it just poped itself out from the kick back thats all......but here are those pics need more lemme know im trying to hopfully figure this out before i have to bring it back tommorow ......but like i said depending on what they say i might have no choice but to fix it............hopfully ill be good tho...........anyones help is seriously greatly apriciated.....................Pics up........

i think theres a piece of plastic that was on the bottom of the part that came off, that broke off allowing it to come off in the first place, and now it may be bouncing around inside jamming stuff up

the peice that came off did not seem like it was atached to anything that broke off....its all there ....all the peice is is a little plastic plate that sits right directly in front of the rear sight making the corners flush with the frame.....the peice has kind off a rivited edge on the bottom that snaps into a slot .....(kind of like those old school two peice paper airplane deals you used to get at the dentist, or a snap together model or somthing)....but still the peice is all solid and together nothing came off and nothing loose inside...all it was was the kick that seperated / stretched the frame enough for it to slide / pop out...........

Sent you a PM
________
Child zoloft

I have exactly the same problem today...
anybody can help me too please?

No pieces seems to be broken....
Only the nozzle is moved forward and stop the ''ejection door'' and it not close completely.

What I have to do?

Alright, the best way to find out problems with the TF11 is to simply take it apart. From what I gather what might be jamming the bolt of your gun is a small guide peice for the selector plate in the gun.

I broke mine off intentionally and cut off a peice of the loading rod and glued it in place instead. I'll have pictures up tonight.
I dunno what was going through the designers head when he made the guidepeices (No thicker than a pencil lead :/)

So, take it apart, look on the left side of the trigger mechs intenals, see if there are any little needly peices of plastic broken off and try and do the same, there isnt much to the gun

Just be sure to memorize what parts gowhere (Out of the 5 that make up the lower receivers mechanism)
________
Marijuana vaporizer

I disassembled the lower receiver from the upper . I checked the trigger mech internals and everything is OK. The problem is with the ''bolt'' in the upper receiver. The door wouldn't close completely, I can move the nozzle by the front, but I can't put it completely back and it block the ejection door.

Anyone ever have their TF 11 keep shooting after the trigger is released? The gun also only shoots on auto. I found a small bb sized chunk of plastic and a small spring like the ones on the trigger inside the lower receiver. Any help would be appreciated

Hey guys k well ive since just made things easier and thankfully was able to do just a straight extange for another gun that i knew worked so everything is a ok for now......but however i have still been tripping over this problem since it came up...so far Strelok would have to be the closest i think to solving things and he is deff right about taking this peice apart well worth your time cause theres not much to it and you can get to know the gun nicley.......................The problem has to do with the peice that loads the bbs in th barrel not nescicarily that part of it but a bit further back somthing seizes up and wont let it cock back right.....i had a chance to see two tf's right next to each other, one broke like this and one fine and the problem is near impossible to spot......for all i know its a spring clipped to somthing that was somewhere behind the previously mentioned peice that popped off a clip...i still have no clue and havnt taken this gun apart yet....like i said i just got the new one

same finding.
will buy an other...