do not destroy your KSC G26 when upgrading it like I did.
 

You are going to laugh.
after installing a high-flow valve in the gun and in the mags, I exploded the plastic slide AND the metal slide (both in the same day)

so, blowback is definitely too much for it.
yeah.

What brand of metal slide? As long as it didn't blow the blow back unit apart i'd say the blowback was too much for the (and im just guessing here) TW alunium slide. Maybe get your hands on a shooters design, or somthing higher end..

better show that MikeMcNair guy who frequents these forums.

it's the original KSC slide that comes with the full metal g26...

witch is probably made out of monkey metal, witch is in most case not stronger than plastic... lol

best bet would be a aftermarket slide witch is not made from monkey metal...

Yes the fmu ksc's come stock with a TW alunium slide, like i said try shooters design or pgc. (i was under the imrpression you ordered this slide and upgraded it yourself)

I upgraded my friends G26C with a TW metal slide, tightbore, high speed recoil spring with bearing system, and high flow. That gun shoots fast, hard and awesome. Many rounds through it without a single problem yet :D

Yeah, get a CNC'd metal slide like SD, not a monkey metal/pot metal one.

ok thanks, where can I get one in country?

where did you guys get yours?

in country? not likely. dont try ordering these on your own either. normally, they wouldn't be a problem, but case the barrel length is technically for a prohibited item (assuming we are talking about a REAL G26), than you are going to have to order your slide through Airsoft Parts Canada. That is what i did with my G19 slide.

ok thanks!

jimski, you know what i have/had done to mine, and never had an issue. what recoil springs and rod are you using?

fixed :)

well, you can order it from oversea but just to make sure it has a big mark as TOYS on it then it would pass through. I order 2 G16 which is Shooter Design, and PGC. Both of them pass through even it has been opened, again it might be my luck then.

yes! I was using the stock one and of course it had to blow.
will do.
thanks KND..I have a new slide on the way through airsoftparts, I may try your way though.