Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Purchase (https://airsoftcanada.com/showthread.php?t=91362)

toukee October 5th, 2009 05:07

Purchase
 
Hey, I'm new to airsofting but I have had a small taste of what airsoft is like. Me and my friends used to shoot each other with those cheap pistols. I am now purchasing http://www.swisslink.com/products/pr...id=1321&sid=28 if anyone has suggestions on if I should get this or not then please post it.

Watase October 5th, 2009 06:01

Quote:

Originally Posted by toukee (Post 1077785)
if anyone has suggestions on if I should get this or not then please post it.


Just one suggestion.. DONT

You can NOT legally get it across the border, it will get stopped.. Long story short, get age verified. It's all in the FAQs somewhere +_+

airsoft newbie October 5th, 2009 06:53

I have yet to see that gun on any major canadian websites so it won't make it across the border, and you can't get it here. Get AV'd like Watase already said.

L473ncy October 5th, 2009 09:49

I can tell you where I've seen that and it's in the classified section here. Not the exact same model/brand but pretty close and then it's just a matter of doing a few mods (rails and such).

Love October 5th, 2009 10:30

That gun is pretty much similar to the Aftermath Broxa. (Viewable here: http://www.sportsextremeusa.com/imag...oxa_1640zm.jpg )

NoGear October 5th, 2009 11:28

Get AV'ed and research before you buy

adam west October 5th, 2009 12:31

Quote:

Originally Posted by Lythinca (Post 1077838)
That gun is pretty much similar to the Aftermath Broxa. (Viewable here: http://www.sportsextremeusa.com/imag...oxa_1640zm.jpg )

if you get the broxa you will need a new magazine because the stock one sucks

Rock 'N' Roll Outlaw October 5th, 2009 18:14

Quote:

Originally Posted by adam west (Post 1077913)
if you get the broxa you will need a new magazine because the stock one sucks

Also, if you get the Broxa you will need a new gun because the stock one sucks.

Spawn28 October 5th, 2009 18:46

Quote:

Originally Posted by Rock 'N' Roll Outlaw (Post 1078069)
Also, if you get the Broxa you will need a new gun because the stock one sucks.

+1 to that unless your looking at dropping double the price in upgrades

Rock 'N' Roll Outlaw October 5th, 2009 18:53

No more squeeking? :(

Twin#1[Op-for] October 5th, 2009 19:02

Quote:

Originally Posted by Rock 'N' Roll Outlaw (Post 1078069)
Also, if you get the Broxa you will need a new gun because the stock one sucks.

LOL! Apperently, they aren't TOO bad, some people over here play with them in Op-for

kalnaren October 5th, 2009 19:59

Quote:

Originally Posted by Rock 'N' Roll Outlaw (Post 1078069)
Also, if you get the Broxa you will need a new gun because the stock one sucks.

bwahahahaha

so true.

TokyoSeven October 5th, 2009 20:03

At this point in time I would just like to add that the original posters IP address does not even originate from North America.
So they are either foreign or a dirty IP proxing rat bag troll.

Quote:

Originally Posted by toukee (Post 1077785)
Hey, I'm new to airsofting but I have had a small taste of what airsoft is like. Me and my friends used to shoot each other with those cheap pistols. I am now purchasing http://www.swisslink.com/products/pr...id=1321&sid=28 if anyone has suggestions on if I should get this or not then please post it.

Buy whatever you want from wherever you want. The only thing I will offer you for advice is that cost reflects quality.

L473ncy October 5th, 2009 20:08

Oh... I see. Well in that case OP, just go to redwolf or something and buy yourself whatever you want.

TM is always good and you're guaranteed a quality product with tight tolerances and will last you forever (unless you break the body in which case just buy a new metal one). Below I've posted a link to the TM MP5 guns they're in your price range and if you want to make it shoot faster/harder all you need to do is buy a $10-15 spring (don't go too hard though since the internals are likely to break with too strong of a spring).

http://redwolfairsoft.com/redwolf/ai...tegory?menu1=1

Spawn28 October 5th, 2009 20:18

Sorry...... Squeek squeeker squeek!

and yeah my broxxa neddded about 80$in upgrades before it was fieldable mags fed for shit so new hopup and barrel some bushings and got rid of every clear internal piece in/on it


All times are GMT -4. The time now is 01:44.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.