Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   Is this true about Proud Enchanced Spring for KSC USP Compacts? (https://airsoftcanada.com/showthread.php?t=96522)

Stealthee January 11th, 2010 12:03

Is this true about Proud Enchanced Spring for KSC USP Compacts?
 
So I bumped into this website and found this: http://www.zero-ops.com/kscuspreviewpage.html.

Is it true about this part:

Quote:

The Proud Enhanced・Hammer spring is a different story, this spring is definitely harder than a 150% hammer spring and causes the hammer to hit the valve knocker HARD. Too hard to the point where you KNOW durability has been compromised. We read a 4 fps gain from the hammer spring alone. The constant use of this spring will eventually damage your valve knocker
assembly, hammer, hammer strut, and hammer strut lower housing.
I think that's the non-System 7, so it's old, but can it still affect the System 7s assuming it is true? Thank you for your time.


All times are GMT -4. The time now is 16:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.