Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   where to find CYMA parts? (https://airsoftcanada.com/showthread.php?t=96896)

attack-beaver January 17th, 2010 01:38

where to find CYMA parts?
 
so after doing some external upgrades to my CYMA AKS74NU i noticed alot of the front end is basically fucked and not very stable and i would like to replace that entire front end.

what brands would fit in the CYMA receiver?

jamuke January 17th, 2010 02:25

cyma is TM compatible so you've got a lot of choices.
check out airsoftparts.ca
Duy's got some nice AK front ends in

Steven January 17th, 2010 03:14

Airsoft Parts does not have 74un front ends.

You could try Redwolf though

jamuke January 17th, 2010 03:27

hmmm.... the LCT 103 front end looks like one

KNIVEZS January 17th, 2010 03:34

Quote:

Originally Posted by jamuke (Post 1143796)
hmmm.... the LCT 103 front end looks like one

err no ,the 103 look like ak74 type front end

if you don't know ,this is what an aksu look like :D
http://www.enemyforces.net/firearms/aks74u.jpg

attack-beaver January 17th, 2010 16:29

ok well my next question now that i now its TM compatible. who makes front ends?

so i also need a AKS74NU front or could i use any style? just in case i couldn't find the right one?

Drake January 17th, 2010 16:57

Okay, what are you trying to do? Cuz there's several things you'll need to keep in mind while picking parts.

As previously stated, CYMA are TM compatible (so avoid parts made for Dboys/Kalash/VFC).

If it's an AKS sidefolder family receiver, you have to be careful which rear sight block you use because of the spring loaded catch at the front of the receiver (used to hold the stock closed): the standard Marui style blocks are longer (designed to fill that entire space up to the mag well). If you look at your AKSU rear sight block you'll notice the "step" is immediately next to the front screw holes, allowing clearance for the catch mechanism.

If/when choosing a new rear sight block you'll need to select one that has the same clearance. If only seen a few aftermarket rear sight blocks, I know the King Arms one is made like TM so it won't fit. Finding a CYMA one would probably be your best bet.

Other than that, you can use any other front end you want. The AKS-74, AKS-74U, and AK-10x series all basically use the same body.


BTW, what's wrong with your current front end exactly?

attack-beaver January 17th, 2010 20:55

alot of the small metal tabs have broken and after i installed a RIS kit i was noticed small cracks in the outer barrel. propely when i fell on it last season.


All times are GMT -4. The time now is 09:39.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.