Uncock a Glock?
 

Sorry for such a noob question, but how do you "safely" uncock a GBB glock?

Remove the magazine, clear the chamber then pull the trigger.

The Glock has no hammer outside like 1911 variant so basically to release the hammer inside it, you will need to take out the magazines and fire it safe direction. That's safety procedure that we should for do for pistols before storage.

By the way, I'm assume that it's airsoft since GBB need magazine to fire the round. It's not like real steel that bullet can fire by it own.

I never used a Glock but I would do that:
Remove Mag from glock,
Rack and lock see if there is a BB in the chamber, if so use a cleaning rod to push BB out.
Bring the slide back home,
Aim at a safe direction,
Press trigger.

Thats what I would do.. like I said I Never used a Glock before so someone might have a different way!

EDIT: shit too slow lol.

Real Glocks are basically double action (technically striker fired), the only way it gets cocked is by the trigger being pulled to the point the firing pin is pulled back enough then released.

So ya, he's talking about airsoft.

The tm glock 17 lets the bb freely fall out of the chamber without need for a cleaning rod.....never had another gbb that did that...except for my westernarms.

what he said

Allmost all GBBs i've used do that.

My KJW 226 and KWA M9 both let the round fall out of the chamber without need for a cleaning rod. I just have to pull the slide back with the barrel pointing up and gravity does the rest.