Universal Inner barrel
 

in my search for a 550mm inner barrel for my m14 (yes it is 550mm) i stumbled upon this, http://www.rsov.com/index.php?target...roduct_id=3650

let me know what you think, if this is a good idea (will it work), and is there a Canadian retailer that has these in stock?


thanks

Vanaras are one of the most poorly machined tightbores out there.

I believe there was a review Infected Airsoft had done a while ago, it's still on his website. A direct comparison between TM and Vanaras showed Vanara almost doubled the TM grouping results.

Prometheus or EDGI is absolute tops in terms of accurate tightbores, if you are on a budget, Madbull would do too, but no Vanaras.

All you need, right here in Canada...

http://www.airsoftparts.ca/store2/in...oducts_id=1381

M14 barrels a a bit different. Make sure that the one you buy is specifically made for it.

Otherwise you won't be able to lock your barrel in your hop-up. The two cuts for the barrel clip are not at the same place on the M14.

That won't fit an M14.

+1 I would add KM barrels to the list of good buys as well. Vanaras barrels are no better than a stock TM barrel possibly worse.


http://infectedairsoft.wordpress.com...-inner-barrel/