|
Alright, I painted it today because it was sunny and I had a day off from work, the first part I painted was inside the magazine port, however this caused a slight but rather minimal problem with the loader (..there is some paper towel stuck in the tube...). This was my first attempt, it turned out "okay" but not the greatest.
As well I found out that Satin Black is not Flat Black, damn you Wal-Mart for bad advice. Only other problem is paint didn't get under the barrel, so my next 2nd coat after sanding some of the excess off will be with the pump removed.
Pics later. xD
|