Airsoft Canada - View Single Post - CYMA MP5-J won't fire shots! Help!

ybrik · July 7th, 2009, 10:00

During a fully charged batt if it behaves the same, remove motor in the grip and re install. If same thing happens, it "might" be motor height. You could adjust the motor plate. If not, your best bet is opening the mechbox. It could be the a jammed ARL, and most importantly shimming.

July 7th, 2009, 10:00	#12
ybrik Trader rating Join Date: Jun 2007 Location: Ontario, Canada	During a fully charged batt if it behaves the same, remove motor in the grip and re install. If same thing happens, it "might" be motor height. You could adjust the motor plate. If not, your best bet is opening the mechbox. It could be the a jammed ARL, and most importantly shimming. __________________ 5.56x45mm + m27 = M249(SAW)