|
You can have a partially broken wire. Basically, it would be the insulation that hold the connection. When you fit the mechbox in the receiver, the insulation moves and disconnect the wires.
Check for a weak/cold solder too. Sometimes they will "stick" to the metal tab, but no electric connection is present. This can be detected by gently moving the wires close to the solder point. If it detaches, there is the issue. Also, cold solders are usually a dull white/pale gray instead of shiny.
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|