Airsoft Canada - View Single Post

PoFF · August 13th, 2009, 14:10

Well,I finally managed to get something good out of this AEG, and actually most of you were right, this was a combination of a few problems that were listed here :

First of all, the inner barrel was warped, I slipped it on a quarter-inch brass rod to straighten it, plus I slightly shimmed it to have a snug fit into the outer barrel, with tape (6 shims, at equal intervals)

Second : The hop-unit was partially declipped from the inner barrel, causing the hop-up to be misaligned. This has been re-installed properly now.

Many thanks for all your help.

August 13th, 2009, 14:10	#7
PoFF Trader rating Join Date: Dec 2001 Location: Laval, QC	Well,I finally managed to get something good out of this AEG, and actually most of you were right, this was a combination of a few problems that were listed here : First of all, the inner barrel was warped, I slipped it on a quarter-inch brass rod to straighten it, plus I slightly shimmed it to have a snug fit into the outer barrel, with tape (6 shims, at equal intervals) Second : The hop-unit was partially declipped from the inner barrel, causing the hop-up to be misaligned. This has been re-installed properly now. Many thanks for all your help. __________________ Founding member of the S.A.T.T - That's right, were BACK! The only purpose for a pistol is to fight your way back to the rifle you should have never laid down Visitez Arme ?* Feu.com - Le site des amateurs d'armes ?* feu francophones