Airsoft Canada - View Single Post - KJW Hi-capa Trigger Issue-Double Pull to fire

MADDOG · August 17th, 2009, 13:29

Hey Guys,

I need some help, checked the Faq'a and did not see anything on this.

I have a KJW Hi capa KP05, I recently dragged it through the dirt and had to clean it. I got all the dirt out and lubed it up and now when I try to fire it I have to pull the trigger twice to fire once.

If I manually cock the hammer, it appears to fire fine when I pull the trigger. If I rack the slide to cock it, it goes into squeeze the trigger twice mode in order to get the hammer to release.

When it does it fires fine, but it is almost like I need to wiggle the trigger to get some internal part to move or activate. Is the leaf spring the issue or am I missing something.

Any ideas would be much appreciated,

MD

August 17th, 2009, 13:29	#1
MADDOG Trader rating Join Date: Feb 2003 Location: Aurora/Ontario	KJW Hi-capa Trigger Issue-Double Pull to fire Hey Guys, I need some help, checked the Faq'a and did not see anything on this. I have a KJW Hi capa KP05, I recently dragged it through the dirt and had to clean it. I got all the dirt out and lubed it up and now when I try to fire it I have to pull the trigger twice to fire once. If I manually cock the hammer, it appears to fire fine when I pull the trigger. If I rack the slide to cock it, it goes into squeeze the trigger twice mode in order to get the hammer to release. When it does it fires fine, but it is almost like I need to wiggle the trigger to get some internal part to move or activate. Is the leaf spring the issue or am I missing something. Any ideas would be much appreciated, MD __________________ WOLFPACK U-96 Cry Havoc, Let slip the Dogs of War! "Opportunities multiply as they are seized." - Sun Tzu, The Art of War