Airsoft Canada - View Single Post - KJW Hi-capa Trigger Issue-Double Pull to fire

m102404 · August 17th, 2009, 13:37

T....did you completely tear it down...or just the basic field strip?

Did you pull the blow back unit/nozzle?

Is the first trigger pull completely dead? no tension/feel to it?

Check the leaf spring, the tip that sits on the sear and the tip that pushes on the disconnect.

I'd also check that the grip is not tweaking things and riding low. Loosen off the screw at the front, then both grip screws. Make sure the grip is as tight up as possible to the mid-frame, then tighten the grips screws. Then snug (not Hulk) up my screw at the front.

Probably not convenient...but bring it by the house if you want and I'll take a look at it.

I've got a bunch or spare parts that will help isolate the problem as well.

August 17th, 2009, 13:37	#3
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	T....did you completely tear it down...or just the basic field strip? Did you pull the blow back unit/nozzle? Is the first trigger pull completely dead? no tension/feel to it? Check the leaf spring, the tip that sits on the sear and the tip that pushes on the disconnect. I'd also check that the grip is not tweaking things and riding low. Loosen off the screw at the front, then both grip screws. Make sure the grip is as tight up as possible to the mid-frame, then tighten the grips screws. Then snug (not Hulk) up my screw at the front. Probably not convenient...but bring it by the house if you want and I'll take a look at it. I've got a bunch or spare parts that will help isolate the problem as well.