|
Airsoft rifles are not all that precise. That said, to achieve the highest amount of precision consider the following:
- shot to shot velocity consistency (this comes from the piston head/cylinder head/nozzle/hopup unit interaction...and BB diameter/inner barre consistency). A consistent 200fps rifle is more accurate than a rifle that shoots 360 one shot and 420 the next, all other things being equal.
- hopup rubber. a good quality hopup rubber that imparts the same spin to each shot can do wonders for your groups.
- good, heavy bbs. heavier bbs will result in smaller groups...even though they'll be traveling slower from the same gun. It's like magic...your groups shrink instantly. Good quality bbs are consistent in both surface finish, weight, roundness and diameter.
- I believe that tight bores increase accuracy in AEGs...some don't think so. An inch one way or another doesn't matter much. 6.04mm-6.03mm is about as tight as you need.
Before you ask what parts to get...do some research now that you have some specific items to zone in on.
Tys
|