Airsoft Canada - View Single Post

DarkAngel · October 8th, 2009, 15:38

What about Consumable shields? A Metal or Wood Frame where the body and internals are made of hard insulation foam, maybe 1 inch thick. Real shields after being shot a few times end up giving, heavier calibers also can go through it. So I figure higher FPS guns like bolt actions etc with heavier weights should be able to punch through it while higher rof guns shooting less than 300 would take 5-10 rounds to go through it. This would allow for limited use of the shield, and prevent bunkering.

Your thoughts?

October 8th, 2009, 15:38	#18
DarkAngel * Age Verifier status suspended * Trader rating Join Date: Jun 2006 Location: Scarborough	What about Consumable shields? A Metal or Wood Frame where the body and internals are made of hard insulation foam, maybe 1 inch thick. Real shields after being shot a few times end up giving, heavier calibers also can go through it. So I figure higher FPS guns like bolt actions etc with heavier weights should be able to punch through it while higher rof guns shooting less than 300 would take 5-10 rounds to go through it. This would allow for limited use of the shield, and prevent bunkering. Your thoughts? __________________ Certified Sniper Clinic Instructor and Counter Sniper Sentinel Arms Customs - Specializing In Unique, One of a kind guns