View Single Post
Old November 7th, 2009, 10:17   #9
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Sounds like a similar problem I have with my M24 at times. When my feed lip or lips go, a BB will pop out during the bolt pull, and if I am pointing the barrel upwards, even a slight angle, that BB will roll through the nozzle hole in the hop up and enter the area where the cylinder is. Two things, check your mags feed lips, and when cocking the gun, don't point upwards. I used to think I had to take my gun apart on the field to clear it, did that a few times in 2005, but then learned I can just point the muzzle to the ground and shake & roll it, and the BB would fall out (with the mag removed of course).
CDN_Stalker is offline   Reply With Quote