Quote:
Originally Posted by MadMax
Stay away from that knockoff of my V4 adaptor. They screwed up the spring design so it falls out and the tip is missing a feature which gives a good connection to the mag fill valve. It shoots a bunch of gas everywhere when you try to use it. You'll note that my original V4 design had a different diameter at the outer end of the spring. This diameter centred with the valve opening on a propane tank so the spring didn't bind with the probe. I went thru some considerable expense to get this feature done to prevent occasional spring bind which sometimes prevented proper opening of the tank valve.
|
I always wondered why that was. Now I know!