View Single Post
Old November 30th, 2009, 16:33   #21
Azathoth
 
Azathoth's Avatar
 
Join Date: Feb 2008
Location: Red Deer
Quote:
Originally Posted by Crunchmeister View Post
So based on all this, I have a CA G36C. I'm currently sick of fighting with getting that 8.4V mini into the grip. And I hate the trigger response of 8.4 mini.

So what would be the ideal battery with good capacity that would give me good trigger response, not necessarily a much higher rof, and would fit easily inside that horribly tight space without me wanting to tear my small amount of remaining hair out every time I have to switch batteries.
The 7.4 1800mah that I currently use in my P90 is slightly smaller than your typical 8.4 mini pack, made by reedy power

http://67.199.85.166/main/searchboxresults.php

The same pack should easily fit into your G36. Another option is the chewing gum style packs that are available, however they have fairly limited capacity. Look for batteries with discharge rates between 20-25c from a reputable company. No name China packs are no where as good as the 'good stuff' and I have received packs from reputable online HK dealers that were damaged or poorly put together.

You shouldn't over discharge your lipo's. ( <3v a cell), recharging a overdischarged cell could be dangerous. Some smart chargers will not recharge packs that if it detects a cell <3v. Many of the chargers can be tricked into charging said pack anyways however your cells will not perform as well if they have been discharged and 'brought back'

I wish I could talk it, but DonP has something coming down the pipe with the trigger master.

EDIT:
It appears the packs that I am using are discontinued
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver View Post
it would appear I am not first up in this gang-bang
---
WANTED PTW Receiver PRIME, STG, Factory

Last edited by Azathoth; November 30th, 2009 at 16:38..
Azathoth is offline   Reply With Quote