View Single Post
Old December 5th, 2009, 02:37   #19
DarkAngel
* Age Verifier status suspended *
 
DarkAngel's Avatar
 
Join Date: Jun 2006
Location: Scarborough
Send a message via MSN to DarkAngel
My First gun was an SRC, 3-4 years ago I think i bought it. This is PRE V3 SRC and I have not tried thier later models as I have not touched SRC Since.

Quote:
Originally Posted by DarkAngel View Post
1) Make and Model
-- SRC M4 Fullstock with RIS using 2x 8.4v 1800ma BB Bastard Batts
2) Date Purchased
-- August 2006
3) Cost
-- 450$
4) New/Used?
-- Used
5) Mechanical Problems (Where do i start?)
-- Motor pins snapped off
-- Cylinder head exploded
-- Tappet plate snapped due to cylinder head exploding
-- Selector switch (Inside The Gearbox) is falling off
-- Fire Select Switch is getting threaded
-- Constant Feed Problems with the SRC Highcap (Though the highcap works fine on other guns)
-- Shoots 240 out of box and overall big dissapointment + money sucker
6) Esthetic Problems (The Plastic Body SUCKS)
-- Upper Receiver Tabs Broke
-- Replacement Upper Receiver Tabs Broke
-- Lower Receiver Snapped near the stock end
-- Foreward Assist Button Spring is Gone
-- Charging Handle Spring is Gone
-- A Peice of the RIS Snapped off (It inside, near the front of the top RIS, dunno what it does)
7) Rounds Fired Between Failures
-- Less than 500
8) Changes to Internals (Im Rebuilding the gun from the ground up)
No Failures have happened since i started putting aftermarket parts in, The aftermarket parts hold and are reliable, SRC Components are breaking.
-- Guarder SP100 Spring
-- Guarder v2 Ball Bearing Spring Guide
-- Guarder Polycarbonate Selector Plate
-- Guarder Polycarbonate Tappet Plate
-- Progear v2 Reinforced Gearbox (Im still using SRC gearbox untill i can get 7mm Gears)
-- Progear v2 7mm Ball Bearings
-- Guarder Stainless Steel Cylinder (In Progress)
-- Guarder Steel Cylinder Head (In Progress)
-- Guarder v2 Steel Piston Head (In Progress)
-- Guarder v2 Reinforced Gears (In Progress)
-- Systema Performance Long Type Motor (In Progress)
9) Resale Date and Value
-- N/A Ive poured too much money into this gun, i Aint sellin.
-- Value i estimate near 1500 easily from all the aftermarket parts + box mag etc etc
-- Maybe 2000 with all my accessories
10) Optional - Notes and Comments
-- Huge Moneysucker. Every field game, something has broken both internally and externally.
-- Only Buy if you plan to invest ALOT of money in performance parts or replacement stock parts.
-- Only benefit is the SRC came with RIS + Fullstock
-- SRC Highcap Doesnt feed properly with SRC Guns, works fine on TM tho
And i did end up selling it ASAP. I parted it out and Built my C8 from the ground up using QUALITY parts. Those who have seen my C8 in action can vouch for it. Its a trillion times better than any SRC gun. Im not even joking, the SRC spent more time on the bench than actually working. The gun broke down before games even started. Its like it knew when the game was gonna start and broke EVERY game 5-10 mins before game start.
__________________

Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns

Last edited by DarkAngel; December 5th, 2009 at 02:47..
DarkAngel is offline   Reply With Quote