Airsoft Canada - View Single Post

istion · January 11th, 2010, 10:58

ok, had a cheap broken gun laying around here. I got it all working (ish). it was shooting way hot 370 fps for indoor. so decided to cut the spring.

I cut off about three links.

put together mech box best I could.. Is it just me or these gears and and trigger specifically designed to vex one.

now it doesn't seem to fire bb's they get jammed in barrel. no shooting.

If i take out bb's i can feel a rush of air out the barrel when i fire it. If i turn it upside down, load a bb, i see it just sits there in the gun, barely moving when it fires.

If i plug the nozzle with my finger it seems the piston goes half way through it's pull again. bouncing back, ...

nozzle is not in perfect shape, but appears ok (ish)

Did i cut the spring way to short, and need to do the mech box thing again (yikes, though i am getting better)

or is the nozzle bad?

something else??

January 11th, 2010, 10:58	#1
istion Trader rating Join Date: Sep 2009	bb's not flying out. ok, had a cheap broken gun laying around here. I got it all working (ish). it was shooting way hot 370 fps for indoor. so decided to cut the spring. I cut off about three links. put together mech box best I could.. Is it just me or these gears and and trigger specifically designed to vex one. now it doesn't seem to fire bb's they get jammed in barrel. no shooting. If i take out bb's i can feel a rush of air out the barrel when i fire it. If i turn it upside down, load a bb, i see it just sits there in the gun, barely moving when it fires. If i plug the nozzle with my finger it seems the piston goes half way through it's pull again. bouncing back, ... nozzle is not in perfect shape, but appears ok (ish) Did i cut the spring way to short, and need to do the mech box thing again (yikes, though i am getting better) or is the nozzle bad? something else??