Airsoft Canada - View Single Post

Slono · January 14th, 2010, 19:49

So I've upgraded my hop up rubber (basically new), have my hop up set close-ish to max, and made sure the inner barrel and hop up wasn't sloshed with silicon oil. The problem is, the first BB of every mag rolls out of the barrel when once I rack the slide. Its just the first BB, as all the others fire off fine. If I stop firing mid-mag, and point my gun down and shake no BBs fall out. I think I've followed all the proper protocols for this problem, but it doesn't seem to work.

My question is...

Has anybody else experienced this before? Are there any other things that I should try that I haven't already?

Innards:

- Tanio Koba Twist Barrel
- Firefly hop up
- KM High Flow valve (mag)

January 14th, 2010, 19:49	#1
Slono Slow mo. Trader rating Join Date: Aug 2009 Location: GTA	Strange problem with Marui BB retention. So I've upgraded my hop up rubber (basically new), have my hop up set close-ish to max, and made sure the inner barrel and hop up wasn't sloshed with silicon oil. The problem is, the first BB of every mag rolls out of the barrel when once I rack the slide. Its just the first BB, as all the others fire off fine. If I stop firing mid-mag, and point my gun down and shake no BBs fall out. I think I've followed all the proper protocols for this problem, but it doesn't seem to work. My question is... Has anybody else experienced this before? Are there any other things that I should try that I haven't already? Innards: - Tanio Koba Twist Barrel - Firefly hop up - KM High Flow valve (mag) __________________ The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. Last edited by Slono; January 14th, 2010 at 20:52..