Quote:
Originally Posted by ILLusion
This problem was happening before the freezing incident.
Turns out Slono didn't know the difference between oil and grease... and applied a light oil instead of a grease, which is why the problem came back after working for a short while.
Did you apply the grease that I told you to use, Solon?
|
Yes, white lithium grease was applied that same day to the outer barrel, slide, and rails.
When I load the mag into the gun and then rack the slide sometimes I get a misfire. Once that happens I have to unload the mag, rack the slide again and then put the mag back in before the gun functions. Whether it fires with full power or not is a different story.