Airsoft Canada - View Single Post - Looking to make the most powerful (and possibly ONLY) TM 3.8 Hi-Cappa

RacingManiac · February 12th, 2010, 00:18

The right most leaf spring is supposed to be bent "inward"(as in, towards the front of the gun) so that it contacts the disconnector(thus pushing it up).

Take a picture of your sear and hammer....it could be worn and thus not catching properly. TM's although made of pot metal, they are plated quite well that they are rarely wornout(my first Hi-Capa, used, did have it worn out, and a new hammer and sear did the trick). I have no idea how WEs' are, but I'd bet they are pretty shitty.

good news is if you are getting a full Illusion Kinetic treatment with the frame and what not, toss everything WE and just keep the WE grip....The frame will come with its own sear, striker, and you can get steel hammer and disconnect, and valve reset extra....

February 12th, 2010, 00:18	#46
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	The right most leaf spring is supposed to be bent "inward"(as in, towards the front of the gun) so that it contacts the disconnector(thus pushing it up). Take a picture of your sear and hammer....it could be worn and thus not catching properly. TM's although made of pot metal, they are plated quite well that they are rarely wornout(my first Hi-Capa, used, did have it worn out, and a new hammer and sear did the trick). I have no idea how WEs' are, but I'd bet they are pretty shitty. good news is if you are getting a full Illusion Kinetic treatment with the frame and what not, toss everything WE and just keep the WE grip....The frame will come with its own sear, striker, and you can get steel hammer and disconnect, and valve reset extra.... __________________ My Arnies' Album My PBase Album Custom Pistol Whore... Last edited by RacingManiac; February 12th, 2010 at 00:20..