Quote:
Originally Posted by ragnagna
Hi, I would to put a Li-Po battery in my G&G GR16 Carbine and I would like to know wich parts I need to change to avoid problem with it. Thanks for the help!  |
Do NOT use an 11.1v lipo, i had a G&G m4 CQB-H.. and a fully charged 11.1V 1500Mah 20C and it blew it to pieces..... the gears are crap and cannot take the punishment.The stock springs are not of a high enough rating to cycle the piston to the front of the gear box before the sector gear comes around to pick it up again (totally wrecked gear set)...Bad things will happen with that gear box if you do not upgrade a few things. 1:spring-m110 or greater, 2: piston head- ive gone through 3 of them, trust me if you leave your gun stock there great, anything more for velocity they will crack. 3: you will also need a sector clip for proper BB feeding, i had installed one on mine and it fed great. 4: A mosfet ( saving your trigger contacts and making your gun more effecient as well) But instead of even having to open your gear box just go with a 7.4v lipo there great and will last forever between charges, your trigger contacts wont get damaged from arcing. look on the bright side your AEG will last alot longer between rebuilds with a sane rate of fire. Still installing the mosfet couldnt hurt