I just bought this rifle and things aren't going well.
Here's what happened, First off, I put the silicone grease in the mech box. Loaded the mag and attempted to fire it. The mag feed into the receiver just fine but the rounds just rolled out of the barrel. The first three times I pulled the trigger I heard the piston slamming back and forth but the rounds just rolled out of the barrel instead of firing. On the fourth trigger pull I could no longer hear the piston just a loud buzzing sound, witch I think might be the motor spinning freely, so not contacting the gears or striped gears.
I am in no way an expert, I can pull the mech box out but that's it. I'm looking to employ a gun doc in or around Edmonton. I live in Cold Lake.
The spec's on the rifle are:
http://www.airsoftcanada.com/showthr...&highlight=AUG
Internal Upgrades consist of:
Systema M150 spring
Systema All Helical Gear Set Super Torque Ratio
Systema Magnum Motor
Systema Metal Shim Set
Systema New Bore Up Cylinder Set for AUG
Deep Fire Titanium Piston V.2 (Full Teeth / Titanium)
HurricanE 6mm Oil Less Bushing
HurricanE Metal Spring Guide W/Bearing
King Arms Steel Stopperrail
FIRST PSG-1 Barrel 590mm 6.03mm
I've been told to adjust the hop up as it might be wide open and that would fix the problem of rounds just rolling out of the barrel. Again I am very new and not at all comfortable doing my own gun doc work.
I'm heading to Edmonton on Easter Weekend April 2nd-4th if you know of a reputable gun doc in or around the area that could meet with me please PM with there information so I can make contact.
In the mean time I would love to hear of any suggestions I could do to narrow down the problem. So I can have the proper parts and get my baby up and running as soon as possible.
Thank you all for reading and responding to this post!
Chris