Thanks Don, I forgot to mention the use of heatshrink. It's a pain in the ass to de-solder these things and those terminals where not designed to for that purpose, although i'm sure that in many cases they are more than up to the job.
Quote:
Originally Posted by Kingsix
As for TM wires I don't think TM makes wires the distance from the battery and the motor is very short and will have enough resistance to cause noticeable voltage drop.
In short learn to solder it isn't that difficult and it's a handy skill to have.
|
I know that TM doesnt make it's own wiring but the wiring that comes with the guns are black/red and in all cases TM guns include a fuse (was removed previous owner) and a Small tamiya connector (deans shown). On the V6/V7 boxes a soldered motor is not a big deal since the design is still easy to take apart, test and reassemble.
I don't understand a M4/SCAR with a soldered motor connector. The take down is already annoying and going about trouble shooting and testing your gun just became more annoying.
With AK's you have the motor cage again, not so much a big deal.
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver
it would appear I am not first up in this gang-bang
|
---
WANTED PTW Receiver PRIME, STG, Factory