Airsoft Canada - View Single Post

Treefingers · July 1st, 2010, 02:15

PDI 210 spring gives 450 with .2s. That plus a tightbore are the basics. Good piston + head will give you more consistent FPS. Plus a good hop-up setting or a PDI hop-up unit, which would be the best way to go, is crucial. L96 hops seem to be hit or miss, so if you can't get yours set well you might need an aftermarket one.

Edit: Cylinder head will also increase consistency enough to consider adding that.

So:

PDI 210 Spring
Piston + Piston Head
Tightbore
Hop-up unit (Optional)
Good hop rubber
Cylinder Head

May I ask what brand it is? Some of them have awful barrel spacers that are thin foam which need to be replaced to keep your barrel steady.

July 1st, 2010, 02:15	#2
Treefingers Trader rating Join Date: Dec 2008 Location: Windsor, Ontario	PDI 210 spring gives 450 with .2s. That plus a tightbore are the basics. Good piston + head will give you more consistent FPS. Plus a good hop-up setting or a PDI hop-up unit, which would be the best way to go, is crucial. L96 hops seem to be hit or miss, so if you can't get yours set well you might need an aftermarket one. Edit: Cylinder head will also increase consistency enough to consider adding that. So: PDI 210 Spring Piston + Piston Head Tightbore Hop-up unit (Optional) Good hop rubber Cylinder Head May I ask what brand it is? Some of them have awful barrel spacers that are thin foam which need to be replaced to keep your barrel steady. __________________ Last edited by Treefingers; July 1st, 2010 at 02:33..