Airsoft Canada - View Single Post

Treefingers · July 1st, 2010, 17:44

Upgraded sears or a whole new trigger assembly. Though I've never had a problem with my L96 sears, it's recommended that you get one of those or you might run risk of breaking your sears.

You could skip it and get a new piston. You should check the diameter of the spring you bought, there are 7 and 9mm springs for the aps & aps2 system. So you may need to replace the guide to a 9mm as well as the piston. I know I had to. I'm not 100% sure that all of them come stock 7mm, but I know the TSD ones do.

July 1st, 2010, 17:44	#18
Treefingers Trader rating Join Date: Dec 2008 Location: Windsor, Ontario	Upgraded sears or a whole new trigger assembly. Though I've never had a problem with my L96 sears, it's recommended that you get one of those or you might run risk of breaking your sears. You could skip it and get a new piston. You should check the diameter of the spring you bought, there are 7 and 9mm springs for the aps & aps2 system. So you may need to replace the guide to a 9mm as well as the piston. I know I had to. I'm not 100% sure that all of them come stock 7mm, but I know the TSD ones do. __________________ Last edited by Treefingers; July 1st, 2010 at 17:47..