Quote:
Originally Posted by Treefingers
Upgraded sears or a whole new trigger assembly. Though I've never had a problem with my L96 sears, it's recommended that you get one of those or you might run risk of breaking your sears.
You could skip it and get a new piston. You should check the diameter of the spring you bought, there are 7 and 9mm springs for the aps & aps2 system. So you may need to replace the guide to a 9mm as well as the piston. I know I had to. I'm not 100% sure that all of them come stock 7mm, but I know the TSD ones do.
|
Hmm well its a Guarder SP120, maybe someone here has that information about the diameter.