Airsoft Canada - View Single Post

Rabbit · July 29th, 2010, 10:41

CDN_Stalker i guess summed it up

"BTW, fuses only protect the wiring, nothing else. If a surge large enough to damage anything in the gun, it'd be the wiring that would disintegrate, not the parts. But in that case you'd have to have the trigger pulled for a while to make it happen. Even in extreme normal cases, the wiring would get hot to the touch, but still it'd take effort to damage the wire further than that. "

But is it as easy as snipping it out and just soldering the wires back together?

July 29th, 2010, 10:41	#3
Rabbit formerly FrankieCees, Remylebeau Trader rating Join Date: May 2010 Location: Hamilton	CDN_Stalker i guess summed it up "BTW, fuses only protect the wiring, nothing else. If a surge large enough to damage anything in the gun, it'd be the wiring that would disintegrate, not the parts. But in that case you'd have to have the trigger pulled for a while to make it happen. Even in extreme normal cases, the wiring would get hot to the touch, but still it'd take effort to damage the wire further than that. " But is it as easy as snipping it out and just soldering the wires back together? Last edited by Rabbit; July 29th, 2010 at 10:44..