Airsoft Canada - View Single Post

Schwag · July 29th, 2010, 18:03

I don't know why anyone uses any other piston than the deepfire all-titanium tooth.
It's bloody indestructible.
I've been running them in both my high fps/rof guns for 3 years and they show practically no wear. I've installed them in several other guns too and they've never crapped out.
Some people used to say that the bodies had cracked but I have never found that.

With high rof, you'll probably need to shave the second tooth as m10204 mentioned

One very important thing. Make sure you're using at least a 340 fps spring at over 25bps. Much slower than that and the piston won't get back fast enough.

July 29th, 2010, 18:03	#18
Schwag Trader rating Join Date: Sep 2006 Location: A sick fascist corporatocracy.	I don't know why anyone uses any other piston than the deepfire all-titanium tooth. It's bloody indestructible. I've been running them in both my high fps/rof guns for 3 years and they show practically no wear. I've installed them in several other guns too and they've never crapped out. Some people used to say that the bodies had cracked but I have never found that. With high rof, you'll probably need to shave the second tooth as m10204 mentioned One very important thing. Make sure you're using at least a 340 fps spring at over 25bps. Much slower than that and the piston won't get back fast enough. __________________ (Former)Grand Poobah of T.W.A.T.