Thread: kjw m9 trouble
View Single Post
Old August 11th, 2010, 04:53   #1
your-pastor
 
your-pastor's Avatar
 
Join Date: Sep 2007
Location: canada, bc, langley
kjw m9 trouble

ok, to sum my whole post up, i need part #23 for a kjw m9, according to this diagram http://www.justpistols.co.uk/kj-m9s.jpg in fact, a few would be good, in case i need replacement.

Ok, so please don't attack me too badly for this, i've googled the shit outta it and i still cant seem to find it, and i wouldn't bother you guys unless i couldn't find it, and if this is in the wrong section, again, im sorry.

Here's the situation:
Bought a kjw m9 :banghead:
Fielded kjw m9
Broke kjw m9 (still unknown,could be because idoublt tapped it and it was c02
on a hot day)
Gun collected dust in my closet (you guessed it, m9!)
Being the kind of guy who wants to leave it to the pros, I took it to a gun tech who said it couldn't be helped, and then charged me 10 bucks without even taking it apart.:banghead:
Then i took it apart...
The rubber on the top of the mag is shot, however i can replace that, the real problem i found after taking the rear end of the slide apart, (sans diagram thank you very much ), and finding that part 23 ( http://www.justpistols.co.uk/kj-m9s.jpg ) was blown out, not just blown out but shredded aswell.:banghead:

im guessing the solution would be to find said part 23, however, as i stated before, i googled the shit out of it and cant find, it would be helpful if someone could point me in the direction of a means of obtaining it.
__________________
EMT is king, Paypal if i have to +4%
your-pastor is offline   Reply With Quote