Airsoft Canada - View Single Post - Element SU-233 (M3X) & PEQ-16A & Double tape switch

Conker · September 3rd, 2010, 15:20

Just got mine... I'm charging my batteries (damn it's frustrating having to wait for them!) and will try it out.

So far, plastic seems of good quality. Orings are quite hard tho, so probably not a perfect seal. Very little seam lines.

Only thing is that when I mount it on my rail, the bulb cover gets stuck on the front of the rail so I can only put it at the front edge... It's not a big problem as I would have just installed maybe 2 or 3 slots more to the rear, but it does change the ballance a bit. Maybe I'll dremel it a bit... dunno.

If anyone else got one, does it do the same?

Also, the pressure switch works awesomely well, but it does NOT fit my DBoys replica of the TangoDown Battlegrip.

September 3rd, 2010, 15:20	#8
Conker Trader rating Join Date: Jan 2007 Location: Canada / Ireland / USA	Just got mine... I'm charging my batteries (damn it's frustrating having to wait for them!) and will try it out. So far, plastic seems of good quality. Orings are quite hard tho, so probably not a perfect seal. Very little seam lines. Only thing is that when I mount it on my rail, the bulb cover gets stuck on the front of the rail so I can only put it at the front edge... It's not a big problem as I would have just installed maybe 2 or 3 slots more to the rear, but it does change the ballance a bit. Maybe I'll dremel it a bit... dunno. If anyone else got one, does it do the same? Also, the pressure switch works awesomely well, but it does NOT fit my DBoys replica of the TangoDown Battlegrip. __________________ WTS: King Arms/Madbull Mk18 Mod1 - VFC Mk17 SCAR-H midcap mags, FDE - VFC Mk17 SCAR-H + PWS rail, FDE WTB/WTT: CSOR gear, BFG, Tyr, Crye, etc Last edited by Conker; September 3rd, 2010 at 15:27..