|
I disassembled the hammer portion of my SS226 and found that the pivot for the hammer is not a tight fit with the hammer (there is ~.5mm of space on each side for a total of 1mm of free movement). It's this that is giving the play in my hammer and preventing it from staying in the full back position when cocked. I don't have anything to correct this gap. I re-assembled the gun with lots of lube on all contact points and test fired. The first trigger pull seemed to be a double fire, then it remained cocked as it should be. The second and third trigger pulls were single shots. I will give it a full testing tomorrow as it is to late tonight. If it is in fact the hammer hanging the slide this may be corrected by wear as the gun gets broken in. I will advise as I test it.
|