Airsoft Canada - View Single Post

Stealthee · September 9th, 2010, 13:23

The Part #22 is the loading nozzle. There should be a couple of springs that pulls it back to its original position. Disassemble the slide and see if the springs are properly attached between the loading nozzle and the piston cup.

September 9th, 2010, 13:23	#2
Stealthee a.k.a. cloaked Trader rating Join Date: Oct 2008 Location: Scarborough, ON	The Part #22 is the loading nozzle. There should be a couple of springs that pulls it back to its original position. Disassemble the slide and see if the springs are properly attached between the loading nozzle and the piston cup.