Airsoft Canada - View Single Post

Ninja_En_Short · September 14th, 2010, 19:51

Nope, the CO2 KJW are not compatible with Marui. It's the 1st gen that were more or less compatible. The best you could do is buy a new one and keep the broken for spare.

I doubt the CO2 is the reason why it broke, I have a M9A1 KJW (2nd gen with reinforced nozzle), that little guy is unbreakable.
The CO2 is doesn't change much of pressure even if very hot or cold, I could use it by 5 or 30 degrees, it didn't care.
Unless you have a Vertec which was not upgraded and stayed in 1st gen, the CO2 ain't the problem.

The gun probably took some hit.

As for the gun tec charging for nothing... what an ass !

September 14th, 2010, 19:51	#13
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Nope, the CO2 KJW are not compatible with Marui. It's the 1st gen that were more or less compatible. The best you could do is buy a new one and keep the broken for spare. I doubt the CO2 is the reason why it broke, I have a M9A1 KJW (2nd gen with reinforced nozzle), that little guy is unbreakable. The CO2 is doesn't change much of pressure even if very hot or cold, I could use it by 5 or 30 degrees, it didn't care. Unless you have a Vertec which was not upgraded and stayed in 1st gen, the CO2 ain't the problem. The gun probably took some hit. As for the gun tec charging for nothing... what an ass ! __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)