Airsoft Canada - View Single Post

ShadowYami · September 27th, 2010, 17:29

At the stg splat game my gun took a fit and was cased early in.

Got it home gave it a once over checking it over and giving it a nice cleaning.
Got it all back together and tried to fire it. sounded nice and healthy loaded a mag and tried shooting it at a pop can 5 feet away. No impact, as I was taking the mag out I axidently shot my foot. I didn't feel a thing I just found a bb suddenly appear between 2 toes. Clocked it and came out with 50fps with a .2. After that I gave it a whole work over checking everything from the gears to air nozzle to spring to cylinder. Everything in the mechbox was up to snuff. I even installed the replacement spring I had intended to do after the game. Clocked it again and again 50FPS. The mechbox is upgraded to the point where its got the biggest spring it can take with out busting apart. every piece is perfectly fine or working better then normal. I checked hop up and inner barrel even replaced the hop up assembly with the old but still in packaging hop up I got about a year ago. Gave the inner barrel a really good once over.

By all accounts theres nothing wrong. but it still shoots only 50fps
pre splatters it was firring a consistent 325 average (1: 323 2: 327 3: 325 4: 329 5: 321 those are the numbers I logged presplatters)
I am at the point of turning it into a wall piece but I figured at least asking for a little help could show me something I might have missed or prove to me its time to let the dieing dog sleep

September 27th, 2010, 17:29	#1
ShadowYami Trader rating Join Date: May 2010	strange fps issue At the stg splat game my gun took a fit and was cased early in. Got it home gave it a once over checking it over and giving it a nice cleaning. Got it all back together and tried to fire it. sounded nice and healthy loaded a mag and tried shooting it at a pop can 5 feet away. No impact, as I was taking the mag out I axidently shot my foot. I didn't feel a thing I just found a bb suddenly appear between 2 toes. Clocked it and came out with 50fps with a .2. After that I gave it a whole work over checking everything from the gears to air nozzle to spring to cylinder. Everything in the mechbox was up to snuff. I even installed the replacement spring I had intended to do after the game. Clocked it again and again 50FPS. The mechbox is upgraded to the point where its got the biggest spring it can take with out busting apart. every piece is perfectly fine or working better then normal. I checked hop up and inner barrel even replaced the hop up assembly with the old but still in packaging hop up I got about a year ago. Gave the inner barrel a really good once over. By all accounts theres nothing wrong. but it still shoots only 50fps pre splatters it was firring a consistent 325 average (1: 323 2: 327 3: 325 4: 329 5: 321 those are the numbers I logged presplatters) I am at the point of turning it into a wall piece but I figured at least asking for a little help could show me something I might have missed or prove to me its time to let the dieing dog sleep __________________ Its still alive? It should be dead by now. The famass that will not die. It only ever gets used because it has not fired its last shot yet. When I can't patch it up its going to be hung on the wall like a good version 1.