|
TM/WA P14.45 Hybrid! Get rid of your shitty WA hopups!
Well after a full day or working and testing, it's finally alive!
I sucessfully fit a TM hopup and inner/outer barrel into my WA P14.45, no more shitty hopup, and complete lack of good upgrade barrels and rubbers, best of all, this requires NO modifications to your WA pistol
if any1 cares, I'll post up detailed instructions
Basically, I had to grind down the back face of the hopup so that the stubbier WA nozzle could even reach it, then I had to "move" the hole for the slide catch down and forward, and thin the bottom of the hopup rubber as well as cut a notch in it, as well as modify the TM outer barrel lugs to fit with the WA slide lugs, it sounds alot simpler when i say it than it was when I did it, but it was ALOT of trial and error
requires TM hopup unit (duh) also needs TM spring guide and TM outer barrel, as WA ones wont fit
the brass barrel'd hopup is the modified one, with the hopup out of my hicappa beside it for reference, and WA at the top
__________________
Words to live by
Quote:
Originally Posted by Kid
The apartment I am in right now costs $100 a month.
My average spending on food per day is less than $4.
My airsoft spending in the last month and a half has totaled over $1400.
They're called priorities. Get yourself some.
|
Last edited by Thenooblord; October 16th, 2010 at 23:02..
|