November 18th, 2010, 23:21
|
#10
|
|
a.k.a. ian209
Join Date: May 2009
Location: Calgary, AB, Canada
|
Quote:
Originally Posted by juicy
Did you remove enough material from your slide rails?
Edit: yup, just tested with half full mag, stock valves, both SA custom "200%" (more like 120-140% IMO) and stock recoil spring, stock springs, fitted and partially polished slide rails, with PGC Glock 17 slide running with barrel. Guarder loading nozzle/floating valve assembly, tested with: stock piston head, PDI piston head, something that resembles a Dyna but isn't a Nine Ball. Cycled fully to slide lock with all configurations.
I know when I was first installing my PGC slide, I initially had it fitted nice and tight - no rattles. Had cycling issues, so took a little more material off and finished it with high-grit sandpaper again. Slight rattle, but it cycled great.
|
Where did you sand it?
__________________
World record in propane sniffing.
Armory
-KWA Tavor TAR21 GBBR
-TM PX4 w/Detonator Aluminum Slide
|
|
|