Airsoft Canada - View Single Post

LocoYokoPoco · November 20th, 2010, 03:48

Yea, my slide can already free fall without needing a push. And yes, the slide slides really smoothly. There is barely any resistance to it, other than the outer barrel contacting with the slide. Also another thing I noticed, with the stock magazine, the gun fires and cycles properly everytime where as the 2 other TM G17 mags I bought cycle fine for the first few shots and then it gets weak really fast. The new mags also seem to run out of gas a lot faster.

EDIT:
OK so, it seems like it's almost a mag shimming problem. When I push my new mag into my gun, it works REALLY well and kicks very fast. With my stock TM mag that came with the gun, it actually seems to work fine. Go figure :/.

November 20th, 2010, 03:48	#14
LocoYokoPoco a.k.a. ian209 Trader rating Join Date: May 2009 Location: Calgary, AB, Canada	Yea, my slide can already free fall without needing a push. And yes, the slide slides really smoothly. There is barely any resistance to it, other than the outer barrel contacting with the slide. Also another thing I noticed, with the stock magazine, the gun fires and cycles properly everytime where as the 2 other TM G17 mags I bought cycle fine for the first few shots and then it gets weak really fast. The new mags also seem to run out of gas a lot faster. EDIT: OK so, it seems like it's almost a mag shimming problem. When I push my new mag into my gun, it works REALLY well and kicks very fast. With my stock TM mag that came with the gun, it actually seems to work fine. Go figure :/. __________________ World record in propane sniffing. Armory -KWA Tavor TAR21 GBBR -TM PX4 w/Detonator Aluminum Slide Last edited by LocoYokoPoco; November 20th, 2010 at 08:57..