Airsoft Canada - View Single Post

Janus · December 3rd, 2010, 17:27

I find the most common cause is that your valve is improperly seated inside. Unscrew the shell until you hear a click and the "primer" moves to be flush with the bottom of the shell. (then tighten it again)

If this is not the case, inspect your rubber components and maybe recondition them with a bit of plumber's grease (silicone gel).

December 3rd, 2010, 17:27	#2
Janus Trader rating Join Date: Sep 2004 Location: Red Deer, AB	I find the most common cause is that your valve is improperly seated inside. Unscrew the shell until you hear a click and the "primer" moves to be flush with the bottom of the shell. (then tighten it again) If this is not the case, inspect your rubber components and maybe recondition them with a bit of plumber's grease (silicone gel). __________________ Age Verifier - Lower Vancouver Island Brotherhood of Nod - Nod Prime \|\| Vancouver Island Airsoft League - President Unavailable for AV until April 2020. Last edited by Janus; December 3rd, 2010 at 17:29..