|
There is a lower cage type assembly that is a real pain in the arse to tighten up.
First remove the rear portion of the telescopic stock. If you look down the rest of the stock you should see a metal bracket. That bracket is loose because of a nut that has become loose. The nut threads onto a bolt that passes through the stock mount at the hinge (the lower of the two bolts). You'll need to get have a 6" or longer socket extension (or an extension that works with a socket type screw driver) and a socket for the nut that is inside (damn if I can remember the size) . Use the proper size Allen key on the lower bolt and use the ratchet (with the extension) to remove the nut from inside the stock. Once this is done, the metal bracket will also come out. You will notice where the nut sits in the bracket, and so, reinsert the nut into the bracket and carefully reinsert the bracket into the stock. Try to line up the lower bolt with the nut and then tighten the bolt (the socket and extension are now not necessary if the nut is mounted correctly with in the bracket).
The last step is a little tricky as the nut might keep popping out of the bracket as you try to re-thread the bolt into it.
Good luck,
SHA DO
|