Quote:
Originally Posted by grantmac
I had a search through the KJW thread but didn't get the info I needed.
My buffer tube is slightly loose. Nothing extreme but I don't want to put any stress on the inner buffer and I hate wobbles.
Thanks,
Grant
|
For most retractable m4/m16 stocks, there is a screw that you can tighten inside the buffer tube.
Just remove the stock from the buffer tube, (use your manual for that, normally, you just push the stock's lever downward)
Look inside the buffer tube, you should see a screw at the bottom, just tighten that screw and Voila, there should be no wobble.
If you want pics, just ask, I'll post some !