Airsoft Canada - View Single Post

Tamn · December 17th, 2010, 18:41

On my TM 5.1 the nub on the right side of the lower frame lowers properly and the hammer works fine. But when I install the slide, when the nub is depressed as the slide 'slides' over it, it fails to raise as far as originally, and thus the trigger will not release the hammer.

I've spent well over 50 hours scrutinizing my gun over the past 3 weeks with no success.

Anyone experienced this issue? I'm dieing to get some help.
Thanks

December 17th, 2010, 18:41	#1
Tamn Trader rating Join Date: Dec 2010	Tm 5.1 has been stumping me for weeks. On my TM 5.1 the nub on the right side of the lower frame lowers properly and the hammer works fine. But when I install the slide, when the nub is depressed as the slide 'slides' over it, it fails to raise as far as originally, and thus the trigger will not release the hammer. I've spent well over 50 hours scrutinizing my gun over the past 3 weeks with no success. Anyone experienced this issue? I'm dieing to get some help. Thanks Last edited by Tamn; December 17th, 2010 at 18:43..