Airsoft Canada - View Single Post

Ninja_En_Short · January 17th, 2011, 19:22

Bad idea the URX : G&P makes it for WA based and would need to rethread the upper receiver. Plus you need a special tool to mount it.
Take a 7" DD that if possible, uses the regular AR15 barrel nut to avoid incompatibilities. The 7" will also permit to put on a short stroke piston system. If I recall LWRC puts that on all their guns now.

January 17th, 2011, 19:22	#17
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Bad idea the URX : G&P makes it for WA based and would need to rethread the upper receiver. Plus you need a special tool to mount it. Take a 7" DD that if possible, uses the regular AR15 barrel nut to avoid incompatibilities. The 7" will also permit to put on a short stroke piston system. If I recall LWRC puts that on all their guns now. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)