Quote:
Originally Posted by Old School Punk
Does anyone know of a video showing the proper disassembly of a Tokyo Marui G18C slide ?
I am thinking about upgrading mine to a metal slide, but I would like to see what I am getting into before I jump into it.
I have looked around Youtube but I couldn't find and dissassembly vids for this G18C model.
Any hints or tips would be much appreciated.
Thanks
Gordo
|
Yeah you wont find any, because Ive tried.. but its not that difficult:
1. Take off the slide, remove recoil spring/spring guide and outer barrel/hop up assembly.
2. Looking at the rear interior of the slide, there is a Phillips screw. Remove that and the bracket and rear sight should come out.
3. Remove that plate at the bottom of the slide that interacts with the selector switch. There should be a spring at the bottom.
4. Remove the safety selector switch by aligning the selector nub inside the slide, with the nub hole on the slide. The selector should be able to be taken out now. BE CAREFUL, there is a small pin, and spring that may fly out. These are used for the selector to engage the notches on the slide. Underneath the spring, there is also a small metal ball.
5. You can now remove the entire BBU/air nozzle.
6. You can also unscrew the Phillips screw at the front of the slide that holds the front sight in place.
Congratulations, you have officially disassembled your Marui G18C!