February 20th, 2011, 02:27
|
#5
|
Join Date: Jun 2010
Location: Torbay, NL
|
Quote:
Originally Posted by ACCL
I got one and i my experience was:
Pros:
-full metal
-good weight
-blowback*
-decent fps/range for outdoor needs a tight bore
-rof is "okay" 11.1 and mine cooks...ROF is insane and i'm using a 120 spring
-working bolt catch Any tips mine was shipped in pieces and doesn't quite work
-exterior and internal stuff are all standard TM compatible i'm using a madbull ultimate hopup needed a little modification
-new design of anti reversal latch (makes putting the gearbox back together over 9000% easier)
Cons:
-metal body is kinda cheap feeling and not the best. But better than plastic right? (havent had that problem)
-the blowback mechanism is not designed for prolong use. The 2 screws that hold the "bolt" down gets killed pretty fast. doesnt impede anything while the gun is intact but when you open it it kinda comes off ( use loctite or simply take your gun apart as much as possible to clean and maintain)
-some parts MAY require some modding/sanding/spacing to fit perfectly eg: Magpul MIAD grip thanks for the heads up! and after market hop up (i lost mine so replaced with SRC)
Hope this helps with your decision
EDIT: most mags are loose in this gun. I use magpul Pmags and they work flawlessly
|
Giggity
__________________
AK-47, G&G SCAR-L,
TM P90, APS ASR101 M4A1, TSD VSR-10, SIG SAUER P226 X-Five...
|
|
|