Airsoft Canada - View Single Post - TM

turok_t · February 23rd, 2011, 18:17

Well, before you get stoked, wait for others to post their G18C slides from other brands (ie. PGC, Guarder) as I have not seen those slides before. For the recoil spring, im using a 200$ recoil spring with 1/3 of the stock recoil spring for short stroking. I did this because a heavier metal slide will reduce the cycling speed and ROF. Im also using a Firefly floating valve and AABB nozzle since my stock nozzle broke and FPS dropped.

I purchased the SD kit when I went to HK, so i picked it up from the ehobby store. I did see the guarder and pgc slide, but i cant remember the quality. I was too overwhelmed by all the gun accessories around me when i was at the store.

EDIT: the rear sight in the pics above is stock

February 23rd, 2011, 18:17	#9
turok_t Trader rating Join Date: Feb 2009 Location: Toronto, Ontario, Canada	Well, before you get stoked, wait for others to post their G18C slides from other brands (ie. PGC, Guarder) as I have not seen those slides before. For the recoil spring, im using a 200$ recoil spring with 1/3 of the stock recoil spring for short stroking. I did this because a heavier metal slide will reduce the cycling speed and ROF. Im also using a Firefly floating valve and AABB nozzle since my stock nozzle broke and FPS dropped. I purchased the SD kit when I went to HK, so i picked it up from the ehobby store. I did see the guarder and pgc slide, but i cant remember the quality. I was too overwhelmed by all the gun accessories around me when i was at the store. EDIT: the rear sight in the pics above is stock Last edited by turok_t; February 23rd, 2011 at 18:22..